Munin :: iap.pl :: dolphin186.iap.pl

Overview :: iap.pl :: dolphin186.iap.pl :: if err eth0

Field	Internal name	Type	Warn	Crit	Info
This graph shows the amount of errors on the eth0 network interface.
packets	trans	counter	1

This page was generated by Munin version 1.4.5 at 2016-05-03 11:33:21+0200 (CEST)

Munin :: iap.pl :: dolphin186.iap.pl :: if eth0

Field	Internal name	Type	Warn	Crit	Info
This graph shows the traffic of the eth0 network interface. Please note that the traffic is shown in bits per second, not bytes. IMPORTANT: On 32 bit systems the data source for this plugin uses 32bit counters, which makes the plugin unreliable and unsuitable for most 100Mb (or faster) interfaces, where traffic is expected to exceed 50Mbps over a 5 minute period. This means that this plugin is unsuitable for most 32 bit production environments. To avoid this problem, use the ip_ plugin instead. There should be no problems on 64 bit systems running 64 bit kernels.
bps	up	counter			Traffic of the eth0 interface. Maximum speed is 1000 Mbps.

This page was generated by Munin version 1.4.5 at 2016-05-03 11:33:21+0200 (CEST)

Munin :: iap.pl :: dolphin186.iap.pl :: interrupts

Field	Internal name	Type	Info
This graph shows the number of interrupts and context switches on the system. These are typically high on a busy system.
interrupts	intr	derive	Interrupts are events that alter sequence of instructions executed by a processor. They can come from either hardware (exceptions, NMI, IRQ) or software.
context switches	ctx	derive	A context switch occurs when a multitasking operatings system suspends the currently running process, and starts executing another.

This page was generated by Munin version 1.4.5 at 2016-05-03 11:33:21+0200 (CEST)

Munin :: iap.pl :: dolphin186.iap.pl :: iostat